Valor BD-33 Heavy Duty Power Rack

This item is no longer available.

8 Band Pegs! Add or remove resistance for the upper or lower part of your lift with these band pegs set at the top and bottom of the rack.

Chrome Plated Bar Holders - The chrome finish on the bar holders and safety arms won't wear off like the painted finish that you'll find on other power racks.

Multi-Grip Pull Up! An 86" high pull up bar to keep your feet off the ground, and ready to grip in a variety of angles.

This rack is a bit of an upgrade over the BD-11 with reinforced corner supports that raise the weight limit to 1000 lbs, as well as the addition of band pegs and upgraded pull up bar.

• 4 Plate Storage Pegs, 1" Dia x 8" Long
• 4 Chrome Bar Holders
• 2"x2" 12-Gauge Steel Tubing
• Upper and Lower Adjustable Band Pegs with Clips
• Multi-Grip Pull Up Bar
• Numbered Holes on Uprights
• Upright Holes are 2" Apart on Center
• Chrome-Plated Saber-Style Safety Bars
• 1000lb Weight Limit
• 50"L x 63"W x 86.25"H

OPTIONS:

Lat Pull Attachment

This transforms the power rack into a complete home gym. Add lat pulldowns, tricep extensions, upright rows, curls, and many more exercises depending on the attachments you want to add. 2"x2" 12-gauge tubing. 350 lb capacity.

Cambered lat bar and short straight bar included.

Weight posts are 1" diameter to hold standard or olympic plates. Add the adapter sleeves to fit olympic plates more snugly.

Dip Handles

Do dips inside of your power rack!

• 365lb Weight Limit (by actual flex test)
• Height Adjustable
• Secure Peg and C-Lock Mechanism
• Optionally stores in rear of frame when not in use (see video)

Outside Safety Arms

Includes a pair. These safety arms will fit on the outside front of the power rack, giving you the option of doing exercises outside of the cage with safety in mind.

Attach these easily to your rack by turning the safety bar sideways, inserting the peg into the hole, and turning the safety bar into position to surround the rack's upright tubing with the C-tubing of the safety arm. It won't come loose on you unless you pick it up and rotate it 90 degrees sideways. This is a proven type of mechanism that is used on many high-end power racks.

• 11.75" of Usable Space
• Rubber Lined Surface
• Secure Peg and C-tubing Lock
• 750 lb Weight Limit

Premium Bar Holders

Includes a pair. These rubber-lined bar holders will fit on the inside or outside of the power rack. The power rack comes stock with round steel pegs only. These bar holders have a flat rubber-lined surface to protect your bar and reduce noise.

Attach these easily to your rack by turning the bar holder sideways, inserting the peg into the hole, and turning the bar holder into position to surround the rack's upright tubing with the C-tubing of the bar holder. It won't come loose on you unless you pick it up and rotate it 90 degrees sideways. This is a proven type of mechanism that is used on many high-end power racks.

• 50 Degree Tilt
• 4.25" of Usable Space
• Rubber Lined Surface
• Secure Peg and C-tubing Lock
• 750 lb Weight Limit

Olympic Adapter Sleeves

The plate storage posts are 1" diameter. If you want your olympic plates to fit more snugly, get two pairs of these to put on all the posts. If you're getting the lat attachment, you'll want a third pair.