This commercial grade platform is suitable for any commercial gym. It is built well, by a recognized leader in weightlifting equipment, and made to last.
6 Coats of Polyurethane - Maximum protection of the oak and logo, along with a smooth but non-slippery surface.
12-Gauge Steel Frame - This surrounds the sides of the platform to keep the edges from being damaged. The steel has a matte black finish, and all screws are included.
19mm thick, 41" wide Solid Red Oak covers a 25mm MDF board. The two layers sandwich a membrane between them, minimizing the chance of warping.
27" wide Rubber Matting is laid flush with the oak on both sides.
Pictured ramp not included.
All platforms are made on demand and have an estimated 2 week lead time. Custom logos add one additional week.
Size - All platforms are 8ft wide, so it's only a question of length. 8ft long is the best so that you have plenty of room to drop the weight in front of and behind you. But if you're tight on space, the 6ft works too.
Custom Logo - Your logo is applied prior to varnishing, so it won't wear off. A small York Barbell logo will also be in the corner. For all custom logos, you will receive a design proof to approve. Our customers have been very happy with how the logos turned out. If you don't want a custom logo, the York Barbell logo will be applied in the middle as pictured or hidden on the underside.
Insets - The platform can also be made to fit against a rack, with an inset that fits inside the rack and neatly extends the oak surface. Otherwise the platform will be fully surrounded with the steel frame and is meant to be used without a rack.