So you want a good barbell, but you’re conflicted as to what type to get.
The two main types of bars are power bars (also called powerlifting bars) and olympic weightlifting bars. Just so you know what we’re referring to, weightlifting bars might also be called oly bars or olympic bars. Just to confuse things, "olympic bar" might mean anything. When someone says it, maybe they mean a weightlifting bar, or maybe they mean any bar with 2" diameter ends that will take olympic weights. Who knows. It depends on the context.
In this article we’ll call them "power bars" and "weightlifting bars," just to be consistent. In the next article, that might go out the window and I’ll choose some other designation that strikes my fancy.
Your best choice depends on the exercises it will be used for, and in what kind of environment.
In a Nutshell
Power Bars are meant for the "big 3" powerlifting lifts: back squat, bench press and deadlift. These lifts are what powerlifting competitions are all about. But over the years they have also been embraced as good lifts for pretty much anyone to do, over a wide range of goals and training styles, so power bars are what you’ll see at commercial gyms and lots of other places.
Weightlifting Bars used to be seen mainly in specialized olympic lifting gyms. No longer! When Crossfit got big, manufacturers started producing more of these for all the athletes who started learning that olympic lifts were the way to go. The olympic lifts are the snatch and the clean-and-jerk, both lifts ending with the bar held overhead. You’ve seen those lifts performed at the Olympic Games.
Hybrid Bars combine some elements of both, because you know what, sometimes you want to do cleans and sometimes you want to do back squats or deadlifts. These are hard to define, because so many bars now are made to overlap in some way or another.
Economy Bars are the runts of the litter. They try to be like their big brothers, and they look a lot like them, but they can’t carry as much weight. They’re made cheaper and aren’t as nice to use.
Let’s Break it Down
But you want to know more. What is it about a power bar that makes it awesome for powerlifting but not so good for weightlifting?
- Stiff Steel to faciliate slow, controlled movements with minimal whip action
- Center Knurling to keep friction on your back for squats
- Aggressive/Deep Knurling for a no-slip grip
- 810mm Spaced Ring Markings
- Thicker 29mm-32mm Shaft to be more comfortable for bench presses and squats
- Steel or Brass Bushings to allow some spin
- More Flexible Steel to facilitate the whip desired for heavy cleans
- No Center Knurling so it doesn’t scratch the front of your neck during cleans.
- Soft Knurling so the bar can slide in your transition from the pull to the catch.
- 910mm Spaced Ring Markings
- Thinner 28mm-28.5mm Shaft for a good pulling grip (or 25mm for women’s bars)
- Roller Bearings on the high-end bars for sensitive spin
The ring spacing has to do with the IWF and IPF certification differences, but the rest of the differences noted above have persisted for practical purposes.
Then you’ve got the hybrid bars that are a mix between the two. And realistically, most mid-range bars are more or less hybrids.
York makes both weightlifting and power bars, but they all have center knurling because the IWF certification actually requires it even though it serves no purpose in olympic lifts anymore. Back in the day, when the one-handed snatch was a competition lift, you needed center knurling. That’s a pretty rare lift to be doing anymore with a barbell.
Some bars like CAP’s power bars have the power bar ring spacing and aggressive knurling, but the shaft thickness and no center knurling makes them also like weightlifting bars. So what do you call them? Don’t know. The lack of center knurling honestly I think is somtimes a cost-saving factor, and CAP’s bars have lower price points for comparable quality to other brands.
So for this reason we have cross-listed a number of bars in both the power bars and weightlifting bars categories.
Our Top Hybrid Picks
So you’re still conflicted over which type of bar to get. I understand!
Here are my recommendations for bars that will work well for all-around use. Use them for cleans, squats, benching, anything you want.
Both of these have 28.5mm shafts, no center knurling, chrome sleeves that spin well, and knurling all the way to the shoulder, making them excellent for most purposes.
Troy Hybrid CF Bar
This new bar by Troy has dual ring markings for both powerlifting and olympic lifting. They help a lot in getting your hands in just the right spot for various lifts.
The shaft sports a unique copper coloring to the black oxide coating that makes it really stand out without looking tacky.
Not to mention it is incredibly strong at 270,000 PSI, while still remaining flexible enough for olympic lifts.
Troy’s knurling is a little softer than CAP’s, so this will be more pleasant if you do a lot of cleans.
A raved-about classic that you can find in tons of home gyms and CF boxes.
It was redesigned in 2015 with a black zinc phosphate finished shaft for good rust prevention.
It’s not as strong as the Troy bar, but it’s great if your’e more of an average Joe.
The knurling is a little deeper than the Troy, giving you more of a solid grip.
Not Satisfied? Pick the Right Power Bar or Weightlifting Bar
Do you want to avoid hybrid bars and their tradeoffs? Do you want to get more than one bar? Does your routine have exclusively powerlifting or weightlifting style exercises?
If so, you want to know what the best power bar or weightlifting bar is.
Here’s what you want. Check out these articles for handy charts that compare your options: